One-stop plush material supply Stock warehousing · Multi-warehouse dispatch Founded 2024 in Dongguan
中文 EN
Home/Projects

Projects

By project type: how the brief is set, how the fabric is matched, how the goods are delivered.

All projects How delivery runs What we watch FAQ
PROJECTS

Six typical projects, six different approaches

The same problem calls for a different answer depending on the product. Each project below is set out as brief, approach and outcome.

Projects are grouped by type; customer names and actual quantities have been anonymised. For the full delivery record of a comparable project, contact us directly.
Crystal Super Soft 1mm / 5mm project photoPlush toys · Dongguan

Twelve colours for a season, with no drift in the body fabric

Brief Twelve new plush SKUs launching in one season, with body fabric kept within tolerance across a single batch and trims arriving on the same schedule.

Approach Stock colours were matched against the customer colour card, with the gaps taken to custom dyeing. Body fabric and trims were scheduled on one delivery plan.

Result Goods shipped in phases after the swatch was sealed, earliest first to the line, with trims travelling alongside the body fabric.

Crystal Super SoftCustom dyeingTrims matched
Tafu Fleece · three weights project photoHome textiles · Yiwu

One design, three weights, one handfeel

Brief An autumn-winter blanket in light, medium and heavy weights: the same design had to feel continuous across all three, with the heavy version staying soft.

Approach Stock was held by weight band, with loft and hand compared band by band. All three were colour-matched on the same shade before going into stock.

Result All three weights landed together and were released by store sell-through, so no single weight sat in the warehouse.

Tafu Fleecefull rollsMulti-site dispatch
Pearl Velboa · Minky Dot project photoBaby · Guangzhou

Shedding fabric replaced with a skin-friendly short pile

Brief The comfort toy was shedding noticeably and drawing complaints at retail, so the fabric had to change without losing softness.

Approach Pearl Velboa and Minky Dot were swatched side by side and compared for washing and abrasion, with Binding Rib developed for the edges at the same time.

Result Shedding was resolved and the hand was kept. Fabric and edge binding shipped on one order, so the change did not push out the delivery date.

Pearl VelboaMinky DotBinding Rib
Sile Velboa · Bunny Plush project photoPet products · Foshan

Pilling under scratching, pile flattening after washing

Brief Returns on the pet bed centred on pilling and pile flattening after washing, and the fix had to hold the price.

Approach The contact surface moved to a dense Sile Velboa, while Bunny Plush stayed on the lining to keep it soft.

Result Abrasion performance improved and the pile recovered after washing, at the same cost as before.

Sile VelboaBunny PlushAbrasion
Mink Plush · Stock colours project photoBags · Baigou

A dozen colours, tens of metres each, no stock to carry

Brief A bag factory running small multi-colour orders needed tens of metres per colour; full-roll minimums would have buried them in stock.

Approach Cut lengths were picked from stock colours and assembled colour by colour, with the nearest shades offered where a colour was short.

Result No full-roll commitment, a shorter colour cycle, and repeat orders placed straight by shade number.

Mink PlushCut lengthsStock colours
Thermo Golden Mink · Testing support project photoCar interiors · Yangzhou

Light-fast, low-odour, and past the customer's own inspection

Brief Neck pillows and cushions for car interiors carry hard requirements on light fastness and odour, and had to clear the customer's in-house inspection first.

Approach Thermo Golden Mink was swatched and validated together with the downstream lamination process, with testing scoped to the customer standard.

Result It passed in-house inspection and moved to bulk, with the lamination process fixed at the same time so repeat orders go straight to production.

Thermo Golden MinkLight fastnessTesting support
DELIVERY

Four steps from brief to delivery

The process is not complicated. What matters is that every step leaves a record: what was agreed goes into the order, what was approved gets sealed as a swatch.

STEP 01

Brief

Product type, target weight and pile height, destination market, required date. Answer those four and the plan can be built.

STEP 02

Shortlist and swatch

Two or three items shortlisted for the use, with colour cards and physical swatches sent out; lab dips run in parallel where dyeing is needed.

STEP 03

Seal the swatch and order

Approval seals the swatch. Spec, quantity and date go into the order, with fabric, trims and filling tracked on the same document.

STEP 04

Phased delivery

Production runs to the sealed swatch and ships from the nearest site, with test data travelling alongside. Repeat orders go straight to schedule.

Showroom and colour wall
WHAT WE WATCH

Three places projects go wrong

Colour drift

Same batch from the same dye lot wherever possible, and every cross-batch compared against the colour card. Custom colours are sealed as a sample before bulk is checked against it, not against memory.

Complete kits

Fabric on site with trims missing stops the line just the same. Fabric, trims and filling are tracked on one order and assembled in the sequence the line needs.

Lead time

Stock ships first, custom dyeing is scheduled, and phased arrivals go to the line as they come. If the schedule moves, we say so early rather than the day before.

FAQ

Four questions asked before a project starts

How is the minimum order calculated?

It depends on the item and whether it is in stock: stock colours can be taken in cut lengths, custom dyeing starts at one dye lot. We quote against the item you choose rather than applying one number across the board.

How long does custom dyeing take?

It depends on the colour and the queue. A schedule is given once the lab dip is approved, and urgent orders can start on the nearest stock shade.

Can you provide test reports?

We coordinate submission for testing. The scope follows your destination market and customer standard, and the report is issued by the testing body.

Can we run a small trial batch first?

Yes. We send colour cards and physical swatches first, and agree the trial quantity once hand and colour are confirmed.

Which category does your project fall into?

Tell us the product type, target weight and required date, and we will come back with a fabric plan and a swatching schedule.

Request Colour Card / Sample Browse by application